CustomKraft Variable Frequency Drive (VFD)  
ETL and CETL listed 
 
Electrical: 
 
208 or 230 volts alternating current (VAC) 3 phase 60 hertz  
20 amperes (14.1 minimum current ampacity per drop)   
Hard-wire connections to on-board disconnect 
 
Water:  
 
4.0 gallon per minute (gpm) per bay  
(gravity-fed from stainless steel tank module) 
 
 
 
Slip-on hose connections - equipment fully connected 
 
Stainless steel tubular frame with anodized aluminum backboard and stainless steel 
electrical enclosure with high-voltage lock-out 
 
Electric Motor: 
Baldor® 5 horsepower (hp) 3 phase Model M3218TA  
with automatic thermal protection 
 
High-pressure Pump: CAT® positive displacement plunger pump Model 5CP2120W 
 
 
 
lifetime warranty on discharge manifold 
  
Control Circuit: 
100 VA fused transformer/secondary 24 VAC (3.2 amps)  
 
Compressed Air: 
2 CFM @ 80 psi  per bay (not to exceed 100 psi and and/or 
dispensed fluid not to exceed 110o F) 
Slip-on hose connection to foam board(s) - hose provided with 
equipment 
 
Stainless steel tubular frame with individual 
compartmentalized stainless steel tanks.  
 
Air-diaphragm Pump(s): 
Flojet Model G57 for foam 
applications 
Connect to foam boards 
with slip-on hose 
connections - hose 
provided with equipment. 
 
Drive System:  
Timing belt drive  
 
System Dimensions:  55” width x 25” depth x 78” height 
(system includes two pump modules, four stainless tanks 
on top row only and foam brush board is moved under 
tanks, where bottom row of tanks are pictured)